This preset uses a stock cab, though you can use an IR if you’d like by removing one of the blocks and replacing with an IR. This preset works great with or without other pedals. If you already have a pedal that’s in the preset, you can remove that block and use it for another effect. The following are included as blocks in this preset:
- Compression
- Overdrive – This preset sound is achieved using the overdrive to push the amp so I’d recommend keeping it. It’s set lightly so that you can play clean or more overdriven with the tone in your hand.
- Amp + Cab
- Delay
- Reverb
- EQ
Switches:
- Switch 1: Reverb
- Switch 2: Delay
- Switch 3: Left as the tap/tuner for live use
Snapshots are also setup and have increasing levels of gain:
- Snapshot 1: base level of gain – edge of breakup
- Snapshot 2: 2nd gain stage
- Snapshot 3: Lead tone perfect for standing out in a mix. Greatly increased gain, slightly increased delay and reverb.
Anything in the preset can be changed according to your taste or guitars. ** Please note: every guitar is different, so you may need to adjust the gain or volume to your liking. If you’d like to make the preset louder or quieter without changing the tone, you can adjust the level on the Main L/R block at the end. Directions for use: After downloading the preset, unzip the file and then upload it into your HX stomp using the USB cable and HX Edit.
Reviews